Pellet Stove Furnace
Pellet stoves are available as freestanding units or fireplace inserts that give your home the look of an authentic fireplace with wood burning. They are available as freestanding models as well as fireplace inserts. They can give the appearance of a traditional wood-burning fire.
The auger transports pellets from the hopper into the combustion chamber in the combustion chamber, where they are burned and generate heat. Sensors monitor the flame and can adjust the rate of operation in order to maintain the desired temperature in the room.
1. Energy Efficiency
Pellet stoves burn a renewable, non-toxic fuel made of compressed sawdust wood chips, bark and other materials that are typically put in landfills, but can be turned into a sustainable and clean source of heating. They help homeowners lower their energy use and lower greenhouse gas emissions. Many users of pellet stoves say that they can recoup their initial investment in just few years by reducing their heating costs.
Pellets are stronger and more compressed than natural wood, which makes them more efficient in burning. They also produce less creosote than traditional wood-burning fireplaces. They are also packed in plastic bags that seal out moisture, and require less frequent cleaning.
Similar to other heating systems, pellet stoves need to be properly size and vented. A skilled technician can assess your venting requirements and space to ensure the most efficient results.
In the process of installation the hearth is constructed in accordance with your specifications. Then, the vent is inserted through an opening that is cut into the exterior of your home. The vent can be run through a sidewall or roof depending on your preference and local laws.
After the hearth and vent are completed and the stove is ready to be plugged in and turned on. Some manufacturers provide remote controls that make starting and maintaining the fire simple and others include sensors that monitor combustion, airflow flue temperature, pressure. When the system detects it requires more or fewer pellets, it will signal the auger to accelerate or slow down according to the situation.
All stoves come with a container that can accommodate between 35 and 130 pounds of pellets. Hopper capacities affect how often the stove will need to be filled, with larger hoppers allowing longer intervals between refills. A grille draws air out of the room, passes it through the heat exchanger and then blows heated air in the living area through convection. A grate or auger distributes the pellets, and a pan underneath collects any unburnt ones, along with the combustion residue.
Pellet stoves are more energy-efficient than wood-burning models but not as efficient as electric heaters or natural gas furnaces. Electric components that drive motorized components of the stoves require electricity. This could pose a problem in a power failure, although backup systems such as generators and batteries are readily available.
2. Low Maintenance
Pellet stoves can be extremely efficient, but they need some maintenance in order to function properly. Cleaning your stove and its exhaust vent regularly will stop the accumulation of harmful creosote. This could lead to a fire or an explosion that could cause damage to your stove or even your home.
A pellet stove burns natural wood particles or other materials (like corn kernels, nutshells or small pieces of scrap wood). The pellets are introduced into the combustion chamber by an auger that is powered by electricity. The rate at which the pellets are pumped into the burner is controlled by the thermostat you set. The fire can continue to roar or reduced or even snuffed out according to the temperature you set. When the fire is out, the ash is dropped into an empty ash tray beneath the burner. It can then be easily removed and disposed.
Pellets are created from the waste products of wood processing which would otherwise be discarded. They are a renewable resource and emit less dust than traditional wood-burning stoves, making them a cleaner heating source. The amount of carbon monoxide, carcinogens, and other harmful chemicals that are released from pellet stoves is less than the latest EPA certified wood stoves.
Due to the low emission they produce, these stoves don't require to be vented through a chimney like traditional wood stoves, however, they should be vented through a wall or another exterior structure. Pellet stoves have flue ports that open on the rear or top of the appliance and are connected to the vent pipe which extends outside of the home.
One drawback of pellet stoves is that you need to purchase or store enough pellets to last through the winter season. On average, homeowners of a pellet stove consume three tons of pellets during the course of winter season at a cost of $200 per ton. These expenses increase over time however it's much cheaper than buying and transporting firewood for traditional fireplaces or stove. Make sure you buy enough pellets to ensure that your stove can function through the coldest winter months, and that you have the right place to store them (preferably cool, dry and off the ground).
3. Reduce carbon footprint
Pellet stoves utilize renewable biomass fuel to create heat, which reduces the need for fossil fuels that are finite. This reduces the carbon footprint and helps diversify the sources of energy used in homes.
Even the most modern woodstoves that are EPA certified emit considerably less than pellet stoves. The emissions from pellet stoves are much lower than ones from gas furnaces. Pellets can be made from sawdust or bark, as well as other lumber fragments. They could also include soybeans, corn, or agricultural waste. When they are burned, they release less particulates, which can cause respiratory issues and allergies, carcinogens and nitrous dioxide.
The feed system is the primary difference between pellet stoves and wood stove. Pellet stoves come with hoppers that hold the pellets. When the thermostat or sensors signal that the room requires heating, the auger is turned and the pellets are pumped into the combustion chamber where they burn and produce heat. The combustion chamber flows through a heat exchanger which transfers the heat to a blower and then out into the room. This process produces very little emissions, and creosote is not formed.
After the hopper has been empty, a cyclone removes the ash and places it in an ash jar. The stove also features a fan to circulate the warm, clean air into the living room. The majority of pellet stoves are designed to be maintenance-free and have a large viewing space for you and your family members to enjoy the flames.
The quality of pellets is the main element that influences pellet stove emissions. Poor-quality pellets will produce more emissions. When choosing your pellets ensure that they're certified to meet certain standards and do not contain other ingredients, such as petroleum products or urea. Look for a company with a warranty and will repair or replace parts in the event of a malfunction. If you want to take an even greener approach certain states allow homeowners to claim a tax deduction for installing pellet stoves. This is a great way to help offset the initial cost of this type stove and makes installation more affordable.
4. Reduced Noise
Pellet stoves produce very little smoke or exhaust compared to fireplaces with wood burning. They also have an electric fan to distribute the heat more evenly throughout the space. This is a major reason why pellet stoves require less maintenance than wood stoves. While wood stoves require frequent cleaning of chemical residues and particles to prevent deterioration, pellet stoves can be cleaned by the use of a vacuum cleaner made of metal.
Many manufacturers have designed their stoves to ensure that they are easy to set up and operate as well as maintain. They come in various styles that match the decor of your home. Some come with a programmable thermostat get more info remote control, as well as WIFI apps that let you monitor and manage your stove from any location in the world.
The majority of pellet stoves have an enormous fuel hopper that can hold 35 to 130 pounds of pellets. The pellets are then pumped to the combustion chamber by an auger. The speed at which the pellets are delivered to the burner determines how hot the fire is and also the amount of heat produced. The hopper can be filled with either hardwood pellets (from dense wood species like oak and hickory) or softwood pellets (from pine and fir). Some stoves will even make use of alternative biomass pellets such as those made of corn or switchgrass that can be an environmentally friendly option.
Because pellet stoves burn such a clean fuel, they emit less smoke than traditional wood-burning fireplaces and require less maintenance. They also don't require chimneys, making them a better option for new construction or retrofits.
As opposed to wood stoves that need to be kept regularly cleaned of creosote and other chemicals, pellet stoves require periodic inspections for proper operation and maintenance. This may include regular cleaning and inspection of the ash or "clinker" as well as the fans and motors, depending on the model. Your appliance dealer will be able to explain the correct procedures for your specific brand and model. He can also assist you to identify the right fuel for your stove, and give information regarding storage and safety.